Home
Page
AMS
News
Distributor
Info
Assembly
& Fitting
Hangers
& Wire
Security &
Protection
Workstations
& Tools
Lamination &
Mounting Film
Glue
& Tape
Screws
& Nails
Blades
& Saws
  Email: sales@ArtMaterialsService.com  

General
Info
Glue Tape Pin &
Staple
$150.00 minimum order requirement for domestic shipments.
For orders less than $150.00 but greater than $100.00 there will be a $35.00 handling fee.
$300.00 minimum order for exports.
AMS Staplers, Fitting Tools and Micro Pinner
Contact AMS Customer Service for Special Pricing on Larger Quantities.
       
AMS Air-Powered Staplers are light weight (0.6 kg) and durable. A special modification developed by AMS ensures that these staplers will not cut canvas or crush boards. Cartridges of staples are reloaded quickly within seconds. Each stapler is offered with or without a front spacer (nose plate) which turns it into a fitting tool.
 
The AMS Standard Stapler is available in three variations for affixing staples of crown widths 3/8" (10mm), 3/16" (4.4mm) or 1/2" (12mm).

These staplers are used to fasten materials that are flush. For example, they can quickly clip corrugated corners as well as attach canvas artwork to frames when stretching by hand.

The AMS #S100 Narrow Crown Stapler is particularly useful for attaching sawtooth hangers and door easel backs onto frames.
 
Made in the EU Stapler - 3/8" (10mm) regular crown
Use staple code AMS #S2 / 32
S200 $ 275.00 / Each
   
Nose plate to change S200 into fitting tool
Use staple code AMS #S3 / 31
S201 Call for quote
   
Stapler - 1/2" (12mm) wide crown
Use staple code AMS #S3 / 31
S300SB Call for quote
   
Stapler - 3/16" (4.4mm) narrow crown
Use staple code AMS #S1
S100 Call for quote
 
The AMS Fitting Tool is a stapler with a special nose plate attached to ensure that staples are not driven completely into framing materials, which means the staples are kept extended about 50% above the installed surface. This tool is helpful when inserting staples to hold frameloads into backloaded frames (an inexpensive alternative to a Flexible Tab Tool).

AMS S200 Staplers can be transformed into Fitting Tools with the addition of a special front spacer or nose plate (AMS Code #S201).
 
Made in the EU Fitting Tool - 3/8" (10mm) regular crown
Use staple code AMS #S2 / 32
S200A $ 330.00 / Each
   
Fitting Tool - 3/16" (4.4mm) narrow crown
Use staple code AMS #S1
S101 $ 360.00 / Each
 
The AMS Long-Nose Stapler has the advantages of other AMS pneumatic staplers, but it has an elongated 2-inch nose and a ring to connect a balancer for precision. This stapler can be used where it is difficult to staple with a normal stapler.

This Stapler's 10mm (3/8") wide crown is for use with staples ranging in leg length from 4mm to 16mm (3/32" to 5/8").
 
Made in the EU Long-Nose Stapler - 3/8" (10mm) regular crown
Use staple code AMS #S2 / 32
S200SL $ 370.00 / Each
 
AMS #S2 Staples 10 mm (3/8") STANDARD Crown Staples

Use AMS #S2 Staples with AMS Staplers #S200, #S200A and #S200SL as well as with the following compatible tools: ATRO #7, BEA #71, DUO-FAST #7, HAUBOLD #7100, KIHLBERG #670, PREBENA #V, SENCO #C.
 
Made in the EU Length: 4 mm (5/32") S2042T01C   20,000/box Call for quote.
   
Length: 6 mm (1/4") S2061T01C   10,000/box $ 14.25 / Box
   
Length: 8 mm (5/16") S2081T01C   10,000/box $ 14.55 / Box
   
Length: 10 mm (3/8") S2101T01C   10,000/box $ 16.85 / Box
   
Length: 12 mm (1/2") S2121T01C   10,000/box $ 18.50 / Box
   
Length: 14 mm (9/16") S2141T01C   10,000/box $ 20.50 / Box
 
  AMS #S3 Staples 12 mm (1/2") WIDE Crown Staples

Use AMS #S3 Staples with AMS Staplers #S100, #S101 and #S300SB as well as with the following compatible tools: BEA #97, BOSTICH #SX4023, PREBENA #O, SENCO #W.
 
Made in the EU Length: 12 mm (1/2") S308DT01C   10,000/box $ 25.00 / Box
 
AMS #S1 Staples 3.1 mm (11/64") NARROW Crown Staples

Use AMS #S1 Staples with AMS Staplers #S100, #S101 and #S300SB as well as with the following compatible tools: BEA #97, BOSTICH #SX4023, PREBENA #O, SENCO #W.
 
Made in the EU Length: 10 mm (3/8") S10381001C   20,000/box Call for quote.
   
  Length: 12 mm (1/2") S10122001C   20,000/box $ 55.00 / Box
   
  Length: 14 mm (9/16") S19161001C   10,000/box $ 34.40 / Box
 

Art Materials Service, Inc., helps create effective and productive picture frame assembly environments
through a variety of pneumatic machinery and workstation kits.

Click on images below to link to further product detail.




Art Materials Service, Inc. · 625 Joyce Kilmer Avenue · New Brunswick, NJ 08901 · USA
sales@ArtMaterialsService.com · USA Toll Free: 888-522-5526 · Tel: 732-545-8888 · Fax: 732-545-9166

Weiter zu www.ArtMaterialsService.de

Copyright © Art Materials Service, Inc. - All rights reserved.