AMS: Self-Fastening Hangers

Email: sales@ArtMaterialsService.com

Hanger
Info

Hangers for
Metal Frames

Hangers for
Wood Frames

Self-Fastening
Hangers

Hangers for
Backboards

Cleats for
Heavy Frames

$150.00 minimum order requirement for domestic shipments.
For orders less than $150.00 but greater than $100.00 there will be a $35.00 handling fee.
$300.00 minimum order for exports.

AMS Hangers Attached Without Nails or Screws

For Wood Frames

For Backboards

Machinery

Contact AMS Customer Service for Special Pricing on Larger Quantities.

Small Nailess Sawtooth Hangers for Installation into Wood Moulding AMS Small Size 1” (25mm) Nailess Sawtooth Hangers are attached directly to wooden frames. For standard jobs, the AMS #HAMMER-1 Magnetized Steel Block can be used to help hammer hangers into hardwood frames. For large jobs, AMS Presses #AP-2 and HP-2C equipped with proper Magnetic Die Head can help automate procedure. AMS is proud to continue manufacturing these products at its own facilities in the USA.
	Self-Fastening Sawtooth Hangers for Softwood and Semi-Hard. These hangers can be attached to softwood mouldings by pressing them into frame.

	Plated Zinc Clear
	Bags of 1000:	SW1C-1M9K	$ 35.00 / M

	Bulk boxes of 9000:	SW1C-9MK	$ 22.22 / M

	Self-Fastening Sawtooth Hangers for Hardwood. These hangers can be attached to hardwood mouldings when installed with a tool support.

	Plated Zinc Yellow
	Bags of 1000:	HW1E-1M9K	$ 41.50 / M

	Bulk boxes of 9000:	HW1E-9MK	$ 29.44 / M

Large Nailess Sawtooth Hangers for Installation into Wood Moulding AMS Large Size 2” (50mm) Nailess Sawtooth Hangers are attached directly to wooden frames. AMS is proud to continue manufacturing these products at its own facilities in the USA.
	AMS Large Nailess Sawtooth Hangers -- Size 2” (50mm) for Softwood. These hangers can be attached to softwood mouldings be pressing them into frame using the AMS #Hammer-1 or an AMS Press with AMS #MPH-02 Die Head attached.

	Plated Zinc Clear
	Bulk boxes of 5000:	SW2C-5000	$ 40.00 / M

	Bulk boxes of 1000:	SW2C-1MK	$ 53.00 / M

	AMS Large Nailess Sawtooth Hangers -- Size 2” (50mm) for Hardwood. These hangers can be attached to hardwood mouldings be pressing them into frame using the AMS #Hammer-1 or an AMS Press with AMS #MPH-02 Die Head attached.

	Plated Zinc Yellow
	Bulk boxes of 5000:	HW2E-5000	$45.00 /M

	Plated Black Oxide
	Bulk boxes of 5000:	HW2F-5000	$53.00 /M

	Magnetized hand-held steel block used to hold Small Nailess Sawtooth Hangers (SW1 and HW1) in place while hammering into frame. For large jobs, consider AMS Presses #AP-2 and #HP-2C equipped with proper die head. HAMMER-1: $ 84.00 HAMMER-2: $ 98.00